Super-micro-computer SUPERSERVER 6014L-T Manual de usuario descargar pdf (Pagina 40)

5-4

UPERSERVER 6014L-T User's Manual

5. Once the processor is properly

seated in the socket, turn the lock

mechanism clockwise with the ﬂ at-

head screw driver to lock it.

Repeat the above steps if you wish

to install a secind processor.

Heatsink mounting holes

Screw# 1

1. Do not apply any thermal grease to the

heatsink or the CPU die; the if the required

amount has already been applied

2. Locate the four heatsink mounting holes

on the serverboard.

3. Place the heatsink on top of the processor

and insert the heatsink's four pegs into the

heatsink mounting holes.

4. Using a Phillips screwdriver, screw in

two diagonal screws (i.e. the #1 and the #2

screws) until just snug (do not fully tighten

the screws, which may damage the proces-

sor.) Repeat the same step to install the

remaining two screws.

5. Repeat the steps above to install an-

other heatsink to the secind processor (if

installed).

Screw# 2

Installed processor

Installed heatsink

Installing the Heatsinks

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 119 120

Sin comentarios

Super-micro-computer SUPERSERVER 6014L-T Manual de usuario Pagina 40