Super-micro-computer I2DMR-8G2 Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 78
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
Chapter 2: Installation
2-9
3. Secure the heatsink onto the CPU by tightening all four screws as
shown in Figure 3.
4. Repeat the above steps 1-3 to install the second heatsink on the
second CPU if needed as shown in the Figure 4.
Figure 4
The i2DMR-8G2/iG2 with two heatsinks installed
G. Connecting AC Power to the motherboard and the Power
Pods
1. Connect the 24-pin power connector from the AC Power Supply to the
motherboard. (Refer to Page 1-4 for the locations of power connectors.)
2. Connect two(2) 4-pin 12V/15A power connectors from the AC Power
Supply to the power pods.
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Comentarios a estos manuales

Sin comentarios