Super-micro-computer H8QMI-2 Manual de usuario descargar pdf (Pagina 57)

Chapter 4: BIOS

4-11

 Chipset Conﬁ guration

 NorthBridge Conﬁ guration

 Memory Conﬁ guration

Memclock Mode

This setting determines how the memory clock is set. Auto has the memory

clock by code and Limit allows the user to set a standard value.

MCT Timing Mode

Sets the timing mode for memory. Options are Auto and Manual.

Bank Interleaving

Select Auto to automatically enable interleaving-memory scheme when this

function is supported by the processor. The options are Auto and Disabled.

Enable Clock to All DIMMs

Use this setting to enable unused clocks to all DIMMs, even if some DIMM

slots are unpopulated. Options are Enabled and Disabled.

Mem Clk Tristate C3/ALTVID

Use this setting to Enable or Disable memory clock tristate during C3 and

ALT VID.

CS Sparing Enable

Use this setting to Enable or Disable the CS Sparing function.

DQS Signal Training Control

Disabling this setting will require custom memory timing programming. This

setting is automatically disabled if CS Sparing is enabled. Options are En-

abled and Disabled.

Memory Hole Remapping

When "Enabled", this feature enables hardware memory remapping around

the memory hole. Options are Enabled and Disabled.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

Sin comentarios

Super-micro-computer H8QMI-2 Manual de usuario Pagina 57